Table of Contents
Advertisement
8. Operation by a copy function
8. Operation in a copy function
The copy function can be used when "Copy" is displayed on the upper part of the F3 key.
The copy function works by the latest combination of LCD Remote Keypad (RKP004Z rev.2 or
later) with the Inverter version of APP-CPU is V136 or more of VFAS1, V614 or more of
VFPS1. When either is old, this function does not work.
Limitation in copy function use
LCD type form
Moreover, it is not possible to copy
function can be used.
1) It is not possible to copy, when the inverter form differs,.
2) It is not possible to copy to the inverter while driving.
3) It is not possible to copy, when a minimum unit of the frequency is different.
4) It is necessary to reset up the parameters after the copy when copying between the
inverters from which capacity differs.
5) It is necessary to reset power supply after the copy when the unit of time differs.
Explanation of the top window
• Display of commands executed:
"FWD" or "REV" is displayed to indicate the direction of
rotation.
The operation frequency is displayed in the form of
"
.
Hz."
• Display of operating status:
"RUN" is displayed during operation.
"STOP" is displayed during a stop.
"Trip" is displayed in the event of tripping.
• Display of output frequency:
The operation frequency is displayed in the form of
"
.
Hz."
• Display of alarm/tripping:
If an error or tripping occurs, an error or trip code is displayed.
• Display of error/tripping message:
If an error or tripping occurs, an error or trip message is displayed
Functions of function keys
：Switches between Quick mode and Standard Setting mode
F1
：Brings you to the Language selection window.
F2
：Brings you to Copy mode window.
F3
RKP004Z-1or0
After RKP004Z-2
normally in the following cases even if the copy
8-1
Version of APP-CPU
VFAS1
V134
V136
or less
or more
Disabled
Disabled
Disabled
Enabled
Display of
commands
FWD 60.0 Hz
Quick
F1
VFPS1
V612
V614
or less
or more
Disabled
Disabled
Disabled
Enabled
Display of
operating status
Top View Mode
RUN
60.0
Hz
Overheat alarm
Lng
Copy
---
F2
F3
Display of output frequency
Display of alarm/tripping
Display of error/tripping message
Advertisement
Table of Contents
