Using An Easy Key Function - Toshiba RKP004Z-0 Instruction Manual

Lcd remote keypad
Table of Contents

Advertisement

2
After selecting the position of a figure you want
to change, specify/confirm another figure with
the control dial.
(In this example, a frequency of 30.0Hz is
specified.)
Functions of function keys
The functions keys allow you to select the position
or decimal place of each figure (operation
frequency) you want to increment or decrement
with the control dial.
[F1] key: Selects the position of hundreds.
[F2] key: Selects the position of tens.
[F3] key: Selects the position of ones.
[F4] key: Selects the first decimal place.
When you confirm the frequency specified, the screen goes back to the top window
of Top View Mode.
• ¡ To change the frequency during operation
Press the control dial during operation to display the operation panel operation
frequency menu and turn the control dial to change the setting.

5.2 Using an EASY key function

The [F1] function key can be used as a substitute for the EASY key on the inverter's
main operation panel. When the name of the function assigned to the [F1] key is
displayed in the lower left corner of the window, the [F1] key can be used as the EASY
key.
Quick
: Function of switching between Quick mode and Standard Setting mode
(parameter F750=0)
Panel
: Function of switching between Operation Panel and Remote (parameter
F750=2)
Update : Function of updating the Peak/Minimum Hold setting (parameter F750=3)
* The shortcut key function (parameter F750=1) cannot be used. Even if the parameter
is so set, the name of the function is not displayed on the screen.
Function of switching between Quick mode and Standard Setting mode
<Standard Setting mode selected when power is turned on (parameter PSEL=0)>
(1) When power is turned on, "Quick" is displayed. (If the [F1] key is not pressed.)
(2) When the unit enters Parameter Setup Mode in this situation, the ordinary top
window of Parameter Setup Mode appears.
(1) If the [F1] key is pressed while "Quick" is displayed, "Quick" is switched from
normal to reverse video "
(2) When the unit enters Parameter Setup Mode in this situation, the Quick mode
window appears instead of the top window of Parameter Setup Mode.
<Quick mode selected when power is turned on (parameter PSEL=1)>
(1) When power is turned on, "• @ • @ • @ • @
key is not pressed.)
(2) When the unit enters Parameter Setup Mode in this situation, the Quick mode
window appears instead of the top window of Parameter Setup Mode.
• @ • @ • @ • @
Quick
". (If the [F1] key is pressed.)
Quick
" is displayed in reverse video. (If the [F1]
5-2
5. Operation in Top View Mode
Basic Parameters
FC
Panel frequency
Output frequency
30.0Hz
min=0.0
max=60.0
×1000
×100
×10
0.0
Hz
×1

Advertisement

Table of Contents
loading

Table of Contents