Table of Contents
Advertisement
Problems
Using a copy function is not
possible.
Memory data error message
is displayed.
Disconnection error
message is displayed when
the copy function is used.
"TOSHIBA" screen is
momentarily displayed when
using copy function or the
confirmation of the memory
information.
"----" is displayed when using
the confirmation of the memor
information function.
German cannot be selected. • APP-CPU version of VFAS1 is
Possible causes
• APP-CPU and the LCD type
form may not be appropriate.
• Something is wrong with the
internal memory.
• Connection may be broken
during communication.
• This phenomenon appears only
once when using copy function
for the first time.
• It occurs when LCD has no
information or communication
signal between LCD and the
inverter is disconnected while
copying to the LCD.
less than V104.
11-2
11. Before making a service call
Remedies
• When APP-CPU and the LCD type form
are not appropriate the copy function
cannot be used.
• Copy to the LCD again. (ref. Chapter 8)
• Check the cable and the connector,
then copy again.
• Does not appear after doing copy to the
LCD one time(ref. Chapter 8.1).
• Copy to the LCD. (ref. Chapter 8)
• German can be selected by using
APP-CPU version of VFAS1 is V106 or
greater.
Advertisement
Table of Contents
