Symbols - Oracle PU2SL Safety And Compliance Manual

Safety Precautions
Do not directly connect this product to outdoor metallic communications cables. Always
■
connect the product to outdoor metallic communications cables using a protection device
that is designed for direct connection to outdoor metallic communications cables (such as
a switch or router), or use optical non-metallic communications cables upon leaving the
building.
Do not directly connect this product to outdoor power cables.
■
■
■
Required or recommended use of hearing protection devices in the workplace vary among
■
global regions. Check your local regulations for noise level exposure limits in the workplace
that apply to your installation of Oracle equipment and appropriate use of personal
protection equipment.

Symbols

The following symbols may appear in this book or on your Oracle product:
Caution -
provided in the Oracle product documentation or displayed on the product.
Caution -
touched.
Caution -
personal health, follow the instructions.
Depending on the type of power switch your device has, one of the following symbols may be
used:
Applies AC power to the system.
On -
Removes AC power from the system.
Off -
Standby -
42 Oracle ZFS Storage ZS7-2 • November 2018
For AC Power, connect the product only to an indoor power distribution system that
uses current-limiting circuit breakers for AC power.
For DC Power, connect the product only to earthed power systems that are completely
contained within one building.
There is a risk of personal injury and equipment damage. Follow the instructions
Hot surface. Avoid contact. Surfaces are hot and may cause personal injury if
Hazardous voltages are present. To reduce the risk of electric shock and danger to
The On/Standby switch is in the standby position.