Chapter 2 System Setup
2.1 General
Before you start the computer, please follow these procedures for set up:
1.
Check and adjust jumpers on the motherboard (see Chapter 3)
2.
Install add-on cards
3.
Connect the wires, cables and accessories
4.
Mount the computer
5.
Program the BIOS settings
6.
Install an operating system.
Warning:
1. Switch off and unplug every time you access its interior.
2. The motherboard inside the system is composed of many
delicate ICs, chips and other integrated circuit components.
These components are easily damaged by static shock.
2.1.1 PS/2 Mouse & Keyboard
If you wish to use a full-size desktop keyboard and PS/2 mouse with your
panel PC, follow these instructions:
1.
Be sure the panel PC is turned off.
2.
Attach the keyboard adapter to the 5-pin green port on the rear bot-
tom side of the rear cover.
3.
Attach the mouse adapter to the 5-pin purple port on the rear bot-
tom side of the rear cover.
IPPC-6152F User Manual
8