Introduction - Pakedge WX-1-O User Manual

Dual band access point

Hide thumbs Also See for WX-1-O:

Table of Contents

Introduction

Thank you for purchasing the Pakedge WX-1x

Thank you for purchasing the Pakedge

As the central component of your wireless network, the WX-1x provides you with high

As the central component of your wireless

wireless AC networking. The WX-

can choose their preferred source of wireless internet, improving the overall stability, reli

can choose their preferred source of wireless internet

performance of the wireless network.

Each band (either 2.4 GHz or 5 GHz) of the

•

Access Point Mode: This is the typical configu

•

WDS Bridge Mode: This mode is

cannot use an Ethernet cable directly. Let's say you have a desktop computer in an isolated

portion of an old home and can't run a cable through the whole house to get internet to that

specific computer. When you put the

an access point in root access point mode and send it to a client device through an Ethernet

connection.

802.11ac Dual Band Access

-1x broadcasts on both the 2.4 GHz and 5 GHz band so that select

GHz) of the WX-1x can operate in three modes:

This is the typical configuration for most Wi-Fi networks, as shown below.

This mode is used to send wireless internet to a hardwired device when you

used to send wireless internet to a hardwired device when you

When you put the WX-1x in bridge mode, it can receive a wireless signal from

WX-1

Point.

provides you with high-speed, high-range

, improving the overall stability, reliability and

Fi networks, as shown below.

in bridge mode, it can receive a wireless signal from

1-O User Guide Version 1.0

band so that select devices

Table of Contents