Pakedge WX-1-O User Manual page 11

WX-1-O User Guide Version 1.0
The WX-1x can be configured in several modes: Access Point, WDS Root Access Point, WDS Repeater or
WDS Bridge. When shipped from the factory, the WX-1x is set to Access Point mode. The default IP
address of the WX-1x is 192.168.1.250 and username/password of pakedge/pakedgea.
In order to log into the WX-1x, you must first configure the TCP/IP settings of your PC/Notebook. Follow
these steps:
1. Under Control Panel, double-click Network Connections and double-click the connection
of your Network Interface Card (NIC). The Local Area Connection Properties dialog appears:
2. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties. The Internet Protocol (TCP/IP)
dialog appears where you can configure the TCP/IP settings of your PC.