Wx-1X Start Up - Pakedge WX-1-O User Manual

3. Select Use the following IP Address and type the IP address and subnet mask, as in the example
below. (Be sure the IP address and subnet mask are on the same subnet as the WX-1x.)
WX-1x IP address:
PC IP address:
PC subnet mask:

WX-1x Start Up

To configure the WX-1x through a web browser, type the IP address of the WX-1x (default
192.168.1.250) and press Enter.
NOTE: Make sure the WX-1 and your computer are configured on the same subnet.
To configure the IP address of your computer, follow the steps in the previous section.
192.168.1.250
192.168.1.10
255.255.255.0
WX-1-O User Guide Version 1.0