Introduction
As the central component of your wireless network, the WA-4200 802.11ac 4x4 Wave 2
Access Point provides you with high-speed, high-range wireless 8012.11ac networking. The
AP broadcasts on both the 5 GHz and 2.4 GHz bands so that select devices can choose
their preferred source of wireless connectivity, improving the overall stability, reliability,
and performance of the wireless network.
•
For product regulatory information, see
•
For product patent information, see
System requirements
Minimum system requirements:
•
PoE+ switch or injector, or an AC power adapter (not included).
•
A computer with an Ethernet port (for first AP setup).
Hardware installation
For hardware installation and first-time startup instructions, see the
found in the box.
Default settings and credentials
IP address : IP will be automatically assigned by router if a DHCP server is detected
•
or, if no DHCP server is detected, the default IP address will be automatically set to
192.168.1.21 .
Username/Password (default): admin/password
•
SSIDs (default) : Pakedge_Main (5 GHz) and Pakedge_Alt (2.4 GHz)
•
Security/password: WPA2-PSK/
•
Guest SSIDs (default): PakedgeGuest2.4 and PakedgeGuest5, security/password:
pakedgeguest
WPA2/
•
Transmit power for US and International models
(WA-4200 and WA-4200-1)
18 dBm for 5 GHz and 13 dBm for 2.4 GHz
First-time login
The first time you log in, you are brought to the
username and password (strongly recommended), specify the device's network name and
physical location, set the Country Code, and create or hide wireless networks.
For BakPak Lite setup instructions, see the WA-4200
Note: For APs sold in the U.S. and Israel, the Country Code will be preconfigured and
locked. For units sold in the rest of the world, the Country Code will be blank and must
be configured on the Configure tab during first-time setup.
WA-4200 User Guide
ctrl4.co/reg
ctrl4.co/patents
pakedgewireless
Configure tab. Here you can change your
Quick Start Guide .
4
.
.
Quick Start Guide