Pakedge WX-1-O User Manual page 33

•
Installation of this product must be in accordance with national wiring codes and conform to local
regulations.
•
Avoid using this product during an electrical storm. There may be a risk of electric shock from
lightning. For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug the power supply, and disconnect the
CAT5e to the WX-1-O at the PoE+. This will prevent damage to the product due to lightning and
power surges.
•
Give particular attention to all safety precautions.
•
Operate this product only from the type of power source indicated on the product's marking label.
If you are not sure of the type of power supplied to your home, consult your dealer or local power
company.
•
It is recommended that the customer install an AC surge protector in the AC outlet to which this
device is connected. This is to avoid damage to the equipment from lightning strikes and other
electrical surges.
•
Place PoE+ Injector unit to allow for easy access when disconnecting the power cord/adapter of
the device from the AC wall outlet.
•
Wipe the unit with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not spray
cleaners directly on the unit or use forced air to remove dust.
•
Keep the device away from excessive heat and humidity and keep the device free from vibration
and dust.
•
Do not directly cover the device, or block the airflow to the device with insulation or any other
objects.
WX-1-O User Guide Version 1.0