How To Assemble Your Ceiling Fan Blades And Cap - Fanimation SHOWROOM TRIAIRE MAD8515 Series Manual

How to Assemble Your Ceiling Fan Blades and Cap

1. Secure the three blades using the 3/16˝-24 serrated
head screws with flat washers through the holes
located on the bottom of the motor assembly.
(Figure 1)
NOTE: You will find the fan blade set packed in its own
carton and hardware bag in the fan box.
CAUTION
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled
may result in damage to the fan blades.
NOTE: You will find plastic cap in fan blade set carton.
WARNING
HARDWARE USED:
3/16 -24
SERRATED HEAD
SCREWS
STAINLESS
FLAT WASHER
Plastic Cap
x 9
x 9
Motor
Assembly