How To Assemble Your Ceiling Fan; How To Assemble Your Ceiling Fan Blades And Cap - Fanimation AIREFLUSH LP6804 Series Assembly Instructions Manual

1. Align the wide tab of motor assembly to the wide
notch of ceiling bracket. Carefully secure the motor
housing onto the mounting slots on ceiling bracket by
twisting in a clockwise direction. Be sure the receiver
and all wiring are tucked into the motor housing and is
not pinched. Once the motor assembly is flush with
your ceiling, replace the previously removed screws
and securely tighten all three screws. (Figure 1)

How to Assemble Your Ceiling Fan Blades and Cap

Option A--for use with steel cap
NOTE: If installing the light kit, please skip to Page 12.
INSTALLATION NOTE
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled may
result in damage to the fan blades.
WARNING
To reduce the risk of personal injury, do not bend the
blades when installing, balancing or cleaning the fan.
Do not insert foreign objects in between the rotating
blades.
1. Secure the blade to the bottom of the motor
assembly using the 1/4 ˝ -20 pan head screw with
lock washer/flat washer and skip the central hole
on the blade. (Figure 1)
NOTE: Periodically check blade hardware and resecure
if necessary.

How to Assemble Your Ceiling Fan

Ceiling Bracket
Assembly
Motor
Assembly
HARDWARE USED:
1/4"-20 Pan Head Screw
With Lock Washer/
Flat Washerr
10
Wide Notch
Wide Tab
Motor
Assembly
Figure 1
Figure 1
X 8
Blade