Connecting The Power Cord - Fujitsu DESKPOWER 2000 Series User Manual

Connecting the power cord

After connecting the CRT display unit and other peripherals to the PC main unit, connect the power
cord of the PC main unit to a wall outlet while observing the following precautions.
- Do not plug or unplug the power cord while your hands are wet.
- Do not abuse or remodel the power cord.
- Do not put heavy objects on the power cord and/or stretch, bend excessively, twist, or heat it.
- Do not use your PC if its power cord or plug is damaged or if its receptacle is loose.
- If the electrodes of the power cord plug or the slots of the corresponding receptacle are soiled,
wipe them clean with a dry cloth.
- Connect the power cord to a household power source.
Note the following
Do not plug the power cord of your PC in a multiple plug box. Keep the keyboard and mouse cables
from getting entangled with each other.
- When an electrical storm approaches, disconnect all power cords of your PC from wall outlets.
- When disconnecting the power cord, hold its plug housing rather than pulling directly on the
cord.
- Insert the power cord into the outlet until it is seated completely.
- For safety, you should unplug your PC if you do not plan to use it for a long period of time.
6
Attach the power cord female
connector to the inlet on the
rear of the PC.
Connect the power cord to a power source.
Insert the power cord plug into a wall outlet.