Dm&p vortex86ex2 processor ethercat master system 7” open frame panel pc with 4-wire resistive touch screen (48 pages)
Summary of Contents for Icop VDX-6328RD
Page 1
VDX-6328RD / VDX-6328RD-512 DM&P Vortex86DX 800MHz 3.5” CPU Module with 6S/3USB/VGA/LVDS/AUDIO/LAN/GPIO/CF/FDD/PWMx16 256MB DDR2 Onboard User’s Manual (Revision 1.1A)
Page 2
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part, in any form or by any means without the prior written permission of the ICOP Technology Inc. Copyright 2009 ICOP Technology Inc.
T a b l e C o n t e n t s T a b l e o f C o n t e n t s ............. iii C h a p t e r 1 Introduction……………………………………………1 Packing List ............1 Product Description ..........
Packing List Product Name Package Embedded Vortex86DX CPU All-in-One Board Manual & Drivers CD x 1 RS232 cable x 5 VDX-6328RD PRINTER cable x1 IDE cable x 1 & FDD cable x 1 USB cable x 1 (USB port x 2...
3.5” controller. The VDX-6328RD family of controller is designed as a plug in replacement, with backward compatibility to support legacy software to help extend existing product life cycle without heavy re-engineering.
1.3 Specifications Features VDX-6328RD DM&P SoC CPU Vortex86DX- 800MHz Real Time Clock with Lithium Battery Backup L1:16K I-Cache, 16K D-Cache L2:128KB Cache Cache AMI BIOS BIOS PC/104+ Standard Compliant Bus Interface 256/512MB DDR2 Onboard System Memory Software programmable from 30.5 us to 512 seconds x2...
Page 8
44-pin IDE to Micro SD (Optional) 16~24 Channels 512KB (Optional) SRAM support Single Voltage +5V @ 840mA Power Requirement 102 X 144mm (4.01 x 5.67 inches) Dimension 150g Weight C ~ +70 Operating -40°C ~ +85°C (Optional) Temperature VDX-6328RD Vortex86DX™ 3.5” CPU Module...
1. VI/O Default setting of PCI-104 connector is +5V 2. COM2 RS232/422/485 is selected by BIOS setting 3. J39 Default setting of JTAG Has to be Disable: Pin 1 & Pin 2 short 4. VDX-6328RD-512 is optional VDX-6328RD Vortex86DX™ 3.5” CPU Module...
Page 14
MIC-IN 4-pin Wafer, 1.25∅ , 4x1 Compact Flash 50-pin Type I/II CF Connector PWR_L POWER Active LED (Red) IDE_LE IDE Active LED (Green ) MTBF- MTBF-Out (Orange) LED-SMD BUZZER RESET SWITCH VDX-6328RD Vortex86DX™ 3.5” CPU Module...
IDED12 IDED2 IDED13 IDED1 IDED14 IDED0 IDED15 IDEREQ IDEIOW IDEIOR ICHRDY IDEACK IDEINT IDESA1 IDECBLID IDESA0 IDESA2 IDECS-0 IDECS1 IDELED J2: CF Card Master / Slave Select Pin # Signal Name CLOSE Master OPEN Slave VDX-6328RD Vortex86DX™ 3.5” CPU Module...
Page 16
Pin # Signal Name J8: RESET Pin # Signal Name Pin # Signal Name Reset J9: PS/2 KBD / Mouse Pin # Signal Name Pin # Signal Name KBCLK MSCLK KBDAT MSDAT GGND GGND GGND VDX-6328RD Vortex86DX™ 3.5” CPU Module...
Page 17
J12: COM2 RS232 / 422 / 485 (Optional: TTL / PWM [8254 counter]) Pin # Signal Name Pin # Signal Name DCD2 / 422TX- / RS485- RXD2 / 422TX+ / RS485+ TXD2 / 422RX+ DTR2 / 422RX- DSR2 RTS2 CTS2 VDX-6328RD Vortex86DX™ 3.5” CPU Module...
Page 18
J17: COM3 Pin # Signal Name Pin # Signal Name DCD3 RXD3 TXD3 DTR3 DSR3 RTS3 CTS3 J18: PRINT Pin # Signal Name Pin # Signal Name STB- AFD- ERR- INIT- SLIN- ACK- BUSY SLCT VDX-6328RD Vortex86DX™ 3.5” CPU Module...
Page 19
Pin # Signal Name Pin # Signal Name DCD4 RXD4 TXD4 DTR4 DSR4 RTS4 CTS4 J20: FDD Pin # Signal Name Pin # Signal Name DENSEL INDEX\ MTRO\ DS1\ DS0\ MTR1\ DIR\ STEP\ TR0\ HDSEL\ DSKCHG\ VDX-6328RD Vortex86DX™ 3.5” CPU Module...
Page 20
J21: COM5 Pin # Signal Name Pin # Signal Name DCD5 RXD5 TXD5 DTR5 DSR5 RTS5 CTS5 J23: COM6 Pin # Signal Name Pin # Signal Name DCD6 RXD6 TXD6 DTR6 DSR6 RTS6 CTS6 VDX-6328RD Vortex86DX™ 3.5” CPU Module...
Page 24
Please remove the 0 ohm (1206 type) of R260 and add 0 ohm (1206 type) on R261 VDX-6328RD Vortex86DX™ 3.5” CPU Module...
Page 25
Pin # Signal Name R OUT G OUT B OUT DDCDAT HSYNC VSYNC DDCCLK J31: LVDS Pin # Signal Name Pin # Signal Name VCC3 (3.3V) VCC3 (3.3V) RxIN0- RxIN0+ RxIN1- RxIN1+ RxIN2+ RxIN2- CKIN- CKIN+ VDX-6328RD Vortex86DX™ 3.5” CPU Module...
Page 26
J32~J38: Display type setup (CRT /LCD) Connector Pin # Signal Name GPIOA GPIOB GPIOC GPIOD GPIOE GPIOF (Please refer to Appendix D, for Display type setup) VDX-6328RD Vortex86DX™ 3.5” CPU Module...
Page 27
(Please refer to Appendix A, for TFT Flat Panel Data Output) J39: JTAG Disable (Default setting: Pin 1 & Pin 2 short) Pin # Signal Name Pin # Signal Name JTAG Disable *CPU module will not function if this jumper is not short VDX-6328RD Vortex86DX™ 3.5” CPU Module...
Page 28
J40: LINE OUT Pin # Signal Name MICVREF MIC-IN J41: MIC-IN Pin # Signal Name MICVREF MIC-IN VDX-6328RD Vortex86DX™ 3.5” CPU Module...
The M6117D compatible watchdog timer is called WDT0 and new one is called WDT1. We also provide DOS, Linux and WinCE example for your reference. For more technical support, please visit: http://www.dmp.com.tw/tech or download the PDF file: http://www.dmp.com.tw/tech/vortex86dx/ VDX-6328RD Vortex86DX™ 3.5” CPU Module...
We also offer DOS, Linux and WinCE example for your reference. For more technical support, please visit: http://www.dmp.com.tw/tech or download the PDF file: http://www.dmp.com.tw/tech/vortex86dx/ VDX-6328RD Vortex86DX™ 3.5” CPU Module...
Floppy (A: Driver or B: Driver). Then you must know how to set for this condition in CMOS Setup and boot up under DOS 6.22, X-DOS, DR-DOS and Free DOS. For more technical support, please visit: http://www.dmp.com.tw/tech or download the PDF file: http://www.dmp.com.tw/tech/vortex86dx/ VDX-6328RD Vortex86DX™ 3.5” CPU Module...
New Age x86 SoC platform and we also offer the sample code of PWM which will guide the engineer to control the PWM functionality smoothly. For more inquire of this sample code that please contact our sales team or mail to: info@icop.com.tw VDX-6328RD Vortex86DX™ 3.5” CPU Module...
44 pins IDE to SD Adapter can be easily installed on all Vortex86DX-63xx CPU boards. You or your customers just do the BIOS setting and use SD-1917 to connect IDE connector of Vortex86DX-63xx directly. For further inquiries of SD-1917, please contact ICOP sales team or mail to: info@icop.com.tw for your request.
Please get the drivers from the Driver CD which attached with the standard packing of Vortex86DX-6328RD board or please get it from DMP official website: http://www.dmp.com.tw/tech/vortex86dx/ Vortex86DX-6328RD also supports most of the popular Linux distributions, for more detail information, please visit DMP official website: http://www.dmp.com.tw/tech/vortex86dx/. VDX-6328RD Vortex86DX™ 3.5” CPU Module...
D. Flat Panel Hardware Setting: The VDX-6328RD offers the Hardware setting for the various TFT LCD Flat Panels support and please make sure the jumper setting (J32~J38) before you connect the LCD. Display type setup Connector Note: "C" means close; "X" means open VDX-6328RD Vortex86DX™...
Wiring LCD Cable Please refer to Page 23 (J33: LCD connector) and Page 34~39. Or for more LCD lighting and integration service, please contact our regional sales or mail to info@icop.com.tw you have any questions. VDX-6328RD Vortex86DX™ 3.5” CPU Module...
Mity-Mite Serial Server, Web Camera Tiny Server and RSIP Serial Server. DSock is free for All ICOP products using M6117D/Vortex86/Vortex86SX/Vortex86DX CPU and ICOP also provide the business version of DSock for those customers who are using other x86 CPUs.
CMOS as default setting. Press “End” Key, when the power on Press <Del> to enter the AMI BIOS setup Press “F9” to Load Optimized Defaults Press “F10” to Save configuration changes and exit setup VDX-6328RD Vortex86DX™ 3.5” CPU Module...
Return authorization must be obtained from the vendor before returned merchandise will be accepted. Authorization can be obtained by calling or faxing the vendor and requesting a Return Merchandise Authorization (RMA) number. Returned goods should always be accompanied by a clear problem description. VDX-6328RD Vortex86DX™ 3.5” CPU Module...