Table of Contents
Advertisement
f [QUAD PIXEL DRIVE] is fixed to [ON] when [CUSTOM MASKING] in [BLANKING] is set to anything other than [OFF] ([PC-1], [PC-2], [PC-
3]).
To use the [CUSTOM MASKING] function, the optional Upgrade Kit (Model No.: ET-UK20) is required. To purchase the product, consult your
dealer.
f [QUAD PIXEL DRIVE] is fixed to [ON] while in the four-screen display mode.
f [QUAD PIXEL DRIVE] is fixed to [OFF] when the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] (x page 104) is set to [AUTO(x2-
speed)] or [AUTO(x4-speed)] and the image in simultaneous format is displayed.
f When a focus test pattern is displayed using the [TEST PATTERN] menu, [QUAD PIXEL DRIVE] is set to [OFF]. To enable the QUAD PIXEL
DRIVE function while displaying the focus test pattern, set [QUAD PIXEL DRIVE] to [ON] again while displaying the focus pattern.
[RASTER POSITION]
This will allow the position of the image to move within the display area arbitrarily when the input image is not
using the whole display area.
1)
Press as to select [RASTER POSITION].
2)
Press the <ENTER> button.
f The [RASTER POSITION] screen is displayed.
3)
Press asqw to adjust the position.
Note
f The range that can be moved is limited when the projected image is smaller than the display size of the menu screen (OSD).
98 - ENGLISH
Chapter 4 Settings — [ADVANCED MENU] menu
Advertisement
Table of Contents
