Table of Contents
Advertisement
5)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[4:4:4]
[4:2:2]
Setting [BIT DEPTH] in [SLOT IN] (SDI input)
1)
Press as to select [SLOT IN].
2)
Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3)
Press as to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]
screen is displayed.
4)
Press as to select [BIT DEPTH].
5)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[12-bit]
[10-bit]
Setting [SIGNAL LEVEL] in [SLOT IN] (SDI input)
1)
Press as to select [SLOT IN].
2)
Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3)
Press as to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]
screen is displayed.
4)
Press as to select [SIGNAL LEVEL].
5)
Press qw to switch the item.
f The items will switch each time you press the button.
[64-940]
[4-1019]
[FRAME SYNC SETTING]
Set if the frames are to be synchronized between the multiple projectors.
Frames of the projected images can be synchronized by linking multiple projectors using the <FRAME SYNC 1
IN/OUT> terminal and the <FRAME SYNC 2 OUT> terminal. A combined screen with a balanced contrast can
be displayed by sharing the brightness level of the video signal input to each projector when a multi-display is
constructed by linking the projected images of multiple projectors.
For details of how to connect the projectors, refer to "Connection example when multiple projected images are to
be synchronized" (x page 50).
1)
Press as to select [FRAME SYNC SETTING].
118 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically selects [4:4:4] or [4:2:2].
[4:4:4] or [4:2:2] is automatically selected by reading the payload ID attached to the input signal.
[4:2:2] is selected when the payload ID is not attached to the input signal.
Fixes to [4:4:4].
Fixes to [4:2:2].
Automatically select [12-bit] or [10-bit].
Fixes to [12-bit].
Fixes to [10-bit].
Normally use this setting.
Select this item when gray is displayed as black.
Advertisement
Table of Contents
