Emerson Unidrive HS72 Control Getting Started Manual page 13

Universal variable speed ac drive for induction and permanent magnet motors

Hide thumbs Also See for Unidrive HS72:

Table of Contents

Select the discovered drive.

Select the 'Online' icon to connect with the drive. When a successful connection is made the icon will

be highlighted orange.

Select 'Set mode and region'.

If the required control mode is highlighted in the 'Drive Settings' dialog, then:

•

Change the supply frequency, if required and select 'Apply', otherwise select 'Cancel'.

•

Select 'Default parameters' from the Dashboard and in the 'Default Parameters' dialogue, select 'Apply'

If the required control mode is not highlighted in the 'Drive Settings' dialog then:

•

Select the required mode and supply frequency.

•

Select 'Apply'.

Select 'Setup' and perform the steps highlighted (dotted lines indicate a step which may not need to be

performed (see below):

Unidrive M702 / HS72 Control Getting Started Guide

Issue Number: 2

Table of Contents

Unidrive m702