Billion BiPAC 6300VNP User Manual page 66

Voip wireless-n (vpn) broadband router

Table of Contents

Device Configuration /

Advanced Setup

DMZ

NOTE: This feature disables automatically if WAN connection is in BRIDGE mode.

The DMZ Host is a local computer exposed to the Internet. When setting a particular internal IP

address as the DMZ Host, all incoming packets will be checked by the Firewall and NAT algorithms

then passed to the DMZ host, when a packet received does not use a port number used by any other

Virtual Server entries.

DMZ for: Indicate the related WAN interface which allows outside network to connect in and

communicate.

Note:

Here you can see the Multiple IPs Account/EWAN Service ID 0. It is the interface

set in the previous NAT page.

DMZ:

Enabled: It activates your DMZ function.

Disabled: It disables the DMZ function.

DMZ Host IP Address: Give a static IP address to the DMZ Host when Enabled radio button is

checked. Be aware that this IP will be exposed to the WAN/Internet.

Select the Save button to apply your changes.

BiPAC 6300VNP User Manual

Table of Contents