Device Configuration /
55
Interface Setup
Wi-Fi Protected Setup (WPS) Example II:
PIN Method (Personal Information Number): Configure AP as Enrollee
1. Jot down the AP PIN Code (e.g. 03454435) from the BiPAC 6300VNL. Press Start WPS.
2. Launch the wireless client's WPS utility (e.g. Ralink Utility). Set the Config Mode as Registrar. Enter
the PIN number in the PIN Code (e.g. 03454435)column then choose the correct AP (e.g. Billion_AP)
from the WPS AP List before pressing the PIN button to run the scan.
BiPAC 6300VNP User Manual