2=History - Honeywell Fire-Lite Alarms MS-9600 Manual

Maintenance Programming Level
PROGRAMMING
1=POINT PROGRAM

2=HISTORY

3=PROGRAM CHECK
Maintenance Screen #1
MS-9600 PN 51335:E1 2/14/08
3.7.2 History
Pressing 2 while viewing Maintenance Screen #1 will cause the following screen to be
displayed:
1=VIEW EVENTS
2=ERASE HISTORY
The History feature allows the operator to view control panel events which have been
stored in a history file in memory and erase the contents of the history file
Pressing 1 while viewing the History screen will cause the following screen to be
displayed:
1=VIEW ALL
2=VIEW ALARMS
3=VIEW OTHER EVENTS
To view all the events which have occurred in the control panel since the history file
was last erased, press 1 while viewing the Events screen. To view only alarms which
have occurred, press 2 while viewing the Events screen. To view events other than
alarms, press 3. The most recent event will be displayed on the screen. To view all of
the selected events, press the up or down arrow keys to scroll through the list of events.
If no events have occurred, the display will read NO EVENTS IN HISTORY.
Pressing 2 while viewing the History Screen will cause the following screen to be
displayed:
ERASE HISTORY
1=YES
Erase History Screen
Pressing 1 while viewing the Erase History Screen will cause the message ERASING
HISTORY, PLEASE WAIT to be displayed. The display will then return to the History
Screen. Pressing 2 will cause the display to return to the History Screen without
erasing the History file.
HISTORY
History Screen
HISTORY
Events Screen
PROCEED ?
2=NO
Programming
105