Table of Contents
Advertisement
Master Programming Level
TIMER
1=AC LOSS DELAY
Timer Screen #2
SYSTEM SETUP
1=TIMERS
2=NAC
3=RELAYS
System Setup Screen #2
MS-9600 PN 51335:E1 2/14/08
3.6.5.4.4 AC Loss Delay
The reporting of a loss of AC power to a central station can be delayed by
programming the length of the desired delay. Press 1 while viewing Timer Screen
#2 to display the following:
AC LOSS DELAY
1=NO DELAY
2=ENTER DELAY
AC Loss Delay Screen #1
Pressing 1 while viewing AC Loss Delay Screen #1 will program the FACP to
transmit an AC Loss report immediately to the central station.
Pressing 2 while viewing AC Loss Delay Screen #1 will display the following
screen:
AC LOSS DELAY
RANGE 00-23
AC Loss Delay Screen #2
A flashing cursor will appear in the lower left corner of the display. Type the two
digit AC loss reporting delay in hours (00 to 23 hour delay). When the second digit
is entered, the display will return to AC Loss Delay Screen #1.
Note: For Central Station applications, AC Loss Reporting Delay must be set to a
delay value ranging from 06 to 12 hours. For Remote Station applications, AC Loss
Reporting Delay must be set to a delay value ranging from 15 to 23 hours.
3.6.5.5 NAC (Notification Appliance Circuit)
The options for the NACs on the control panel main circuit board can be set by
pressing 2 while viewing System Setup Screen #2. The following screens will be
displayed:
1=NAC 1
2=NAC 2
The Notification Appliance Circuits can be configured independently by pressing 1
for NAC 1, 2 for NAC 2, 3 for NAC 3 or 4 for NAC 4.
Note that 3=NAC 3 and 4=NAC 4 will only be displayed if the NACKEY NAC
option card is installed, in JP8 of the main circuit board, for Class B operation.
NACS
3=NAC 3
4=NAC 4
NAC Selection Screen
Programming
87
Advertisement
Table of Contents
