Assa Abloy hes RF0010 Installation Supplement

Prox Module
1
Dielectric Grease (apply to connections for humid applications)
2
#6-32 Module Mounting Screws (for optional strike mount)
3
Reader/Antenna Body
4
Reader/Antenna Mounting Screws
5
Reader/Antenna Cover
6
24" Antenna Cable (connecting reader/antenna and Prox Module)
7
2 pin DPS & LBM Pigtail Connector
8
2
Dielectric
Grease
1
7
6
5

Wiring Diagram

Prox Module Electrical Specifications
Operating Voltage 12VDC +/- 20%
Operating Current 125 mA Max @ 12VDC
Cable Detail
Distance to Host 500 ft Max
Recommended Type 18-24 AWG
(Dependent on distance) Stranded and shielded
Certifications
Compliance FCC Part 15/IC Class B
Door Position Sensor (DPS)
Contact Rating 300ma @ 30VDC
Switch Type Form A (SPST) Reed
Installation Supplement
RF0010: Prox Module
To be used when RF0010 is added to an electric strike
11
To Electric Strike
Power
12
To Electric Strike
LBM
4
Prox Module credential specifications
®
Card reader HID 13.56 MHz
Interfaces with any Weigand-compatible access
control system
Supported credential formats
Recognizes HID 26 - 39 bit formats
Supports HID 125 kHz credentials
4 pin 12V Strike Power Pigtail
9
8 pin Connector Prox Module Pigtail
10
Door Position Sensor (DPS)
11
DPS/LBM adapter
12
8
9
10
The Prox Module can be supported by the
electrical connection to the electric strike, or
by mounting it directly to the back of some
models of HES electric strikes using the #6-32
module mounting screws. Do not attempt to
support the Prox Module with the 24"
antenna cable.
8 Pin Connector (Prox Module) Pigtail
Red (+) Board Power
Black ( ) Board Power -
Green Data 0
White Data 1
Yellow LED/Buzzer
Blue Not Used
Orange Not Used
Brown Not Used
HES, Inc.
Phoenix, AZ
800-626-7590
www.hesinnovations.com
Access Control System
Control Panel and Power Supply
(By others)
4 Pin Connector (12V Strike Power)
10
Red (12VDC +) Strike Power
Black (−) Strike Power
2 pin Connector (Strike Module)
Tan Common
Pink Door Closed and Latch Engaged
3
9
8