Related Manuals for GoMax Electronics MX-5004MZF
Summary of Contents for GoMax Electronics MX-5004MZF
- Page 1 MX-5004MZF 4x1 HDMI 2.0a Quad-View Video Processor with 4K2K60 4:4:4 User Manual rev: 160727 Made in Taiwan...
-
Page 2: Table Of Contents
However, like all electronic equipment, the MX-5004MZF should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. -
Page 3: Introduction
INTRODUCTION The MX-5004MZF 4x1 HDMI 2.0a Quad-View Video Processor with 4K2K60 4:4:4 provides the most flexible and cost effective solution in the market to route high definition video source from any of the four FHD HDMI sources to the remote display at the same time. This solution is well suited for use in digital signage, conference room presentation systems or other similar settings or applications. -
Page 4: Specifications
SPECIFICATIONS Model Name MX-5004MZF Technical Role of usage Multiplexer / video processor Background picture update HDCP compliance Input: HDMI 1.4 HDMI compliance Output: HDMI 2.0a Input: HDMI [2.25G to 6.75Gbps] Video bandwidth Output: Single-link 600MHz [18Gbps] Up to 4K2K@60 (4:4:4 8bits) -
Page 5: Hardware Installation
HARDWARE INSTALLATION MX-5004MZF as master 1. Connect all sources to HDMI Inputs on the MX-5004MZF. 2. Connect the display to HDMI Output on the MX-5004MZF. 3. Connect the +12V 5A DC power supply to the MX-5004MZF. CONNECTION DIAGRAM... -
Page 6: Panel Descriptions
PANEL DESCRIPTIONS MX-5004MZF Front Panel LABEL: All Windows label on/off FULL SCREEN: Switch Window in full screen mode Windows Source Selection A-D: Window A-D source selection Default Layout PAP: Four different default layout PAP mode IR SENSOR: IR sensor for receiving the IR commands from IR remote Rotation: Window A rotate °... -
Page 7: Operation Approach
OPERATION APPROACH Method A: IR Remote Control Button Function HDMI/DVI mode switch Reserved Reserved Power on/off the device Rotation Window A rotate 90 ° or -90° Label Window label on/off Fast Switch output’s audio Sound channel To set up the background Background picture of window Select 4K2K output... - Page 8 Method B: Software Control through RS-232 port / Ethernet port System Requirement and Precautions 1. Whenever power off MX-5004MZF, please stay unpowered at least 5 to 10 seconds to allow power capacitors to discharge. 2. The MX-5004MZF provides software control program which runs under Microsoft Windows 98, 2000, XP, 7, 8 through the interface of RS-232 serial control.
- Page 9 Control Interface 1. Connection Status: Show the connect information and status. If users use RS-232 serial Mode to connect device, the graph is . In contrast, the graph of Ethernet is . In addition, if users would like to change the control method, users can click on the button to change.
- Page 10 (2) Quick Selection We provide 9 default modes and 8 custom modes for you to select. (3) Output Resolution Set the output resolution. If user click the 1080p to 4K2K function, when output resolution is 1920 x 1080 @60Hz, it will upscale the resolution to 4K2K. *In 4K2K@60Hz resolution, the output display will be forced to PAP 1 ( ) layout (other PAP layout cannot set) and only can set up the output resolution, sound and background...
- Page 11 (4) Save Layout We provide 8 custom layout space for users to save the frequently used scenarios into the flash memory. (5) Display Panel In the left part of control interface, user can customize the display mode thru control. The different colors of frame represent the different input windows.
- Page 12 3. Advanced Setting (1) Window settings In this mode, user can adjust individual display area for selected input sources. Firstly, user have to choose the specific channel A, B, C, or D, which are presented as in the control panel as shown. After the specific channel is chosen, user can crop the display area of that particular channel at will and do the same to the rest of channels if necessary.
- Page 13 (4) Background To set up the background of window. We provide 4 default pictures for you to select. If you want to change default picture, you can click the button to select the picture which you want to change. (5) Window Label In this function, users can determine if the window’s label/border is turned on or off.
- Page 14 (1) Learn EDID from Default Select Default EDID Select Input Click button to learn default EDID. (2) Learn EDID from File Select input Click button to select the EDID file and write it into input 5.
- Page 15 (5) Firmware Update Click button to do firmware update. The “Firmware update” window shows up as below. Please select the correct COM port or click “Scan” button to connect device. Click “update” button to do firmware update.
- Page 16 If you want to change OSD (window label) font, please click “OSD Font Update” and “update” buttons to change OSD font. (5) Factory Reset Click button to do factory default reset. The process of default reset will take about 25 seconds.
- Page 17 6. IP Configure User also can use the Ethernet to control the mixer. Firstly, user should click on the button button to setup network set. Next, users can setup the Ethernet for the unit as below example shows. After the step of IP configuration, please click the button.
-
Page 18: Warranty
SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the MX-5004MZF features and specifications is subject to change without further notice.
Need help?
Do you have a question about the MX-5004MZF and is the answer not in the manual?
Questions and answers