Table of Contents
Advertisement
[SYSTEM SELECTOR]
The projector will automatically detect the input signal, but you can set the system method manually when an
unstable signal is input. Set the system method matching the input signal.
1)
Press as to select [SYSTEM SELECTOR].
2)
Press the <ENTER> button.
3)
Press as to select a system format.
f Available system formats vary depending on the input signal.
Terminal
<DIGITAL LINK/LAN>
terminal, <HDMI IN 1>
terminal, <HDMI IN 2>
terminal, <HDMI IN 3>
terminal, <HDMI IN 4>
terminal
<DVI-D IN 1> terminal, <DVI-D
IN 2> terminal, <DVI-D IN
3> terminal, <DVI-D IN 4>
terminal
4)
Press the <ENTER> button.
Note
f For details of the types of video signals that can be used with the projector, refer to "List of compatible signals" (x page 251).
f This may not function properly for some connected external devices.
f The selection item for the input signal to the <HDMI IN 1> terminal and the <HDMI IN 2> terminal can be selected when the optional
Interface Board equipped with the HDMI input is installed in <SLOT 1>.
f The selection item for the input signal to the <HDMI IN 3> terminal and the <HDMI IN 4> terminal can be selected when the optional
Interface Board equipped with the HDMI input is installed in <SLOT 2>.
f The selection item for the input signal to the <DVI-D IN 1> terminal and the <DVI-D IN 2> terminal can be selected when the optional
Interface Board equipped with the DVI-D input is installed in <SLOT 1>.
f The selection item for the input signal to the <DVI-D IN 3> terminal and the <DVI-D IN 4> terminal can be selected when the optional
Interface Board equipped with the DVI-D input is installed in <SLOT 2>.
f For the SDI input, the signal format can be set in detail in the [DISPLAY OPTION] menu → [SDI IN] (x page 117).
sRGB-compliant video
sRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International
Electrotechnical Commission).
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1)
Set [COLOR MATCHING] to [OFF].
f Refer to [COLOR MATCHING] (x page 112).
2)
Display the [PICTURE] menu.
f Refer to "[PICTURE] menu" (x page 92).
3)
Press as to select [PICTURE MODE].
4)
Press qw to set [NATURAL].
5)
Press as to select [COLOR].
6)
Press the <DEFAULT> button on the remote control to set the factory default setting.
7)
Follow Steps 5) to 6) to set [TINT], [COLOR TEMPERATURE], [GAMMA], and [SYSTEM DAYLIGHT
VIEW] to the factory default settings.
Note
f sRGB is available for RGB signal input only.
Chapter 4 Settings — [PICTURE] menu
480/60i, 576/50i, 480/60p, or
576/50p signal
Other movie-based signals
480/60i, 576/50i, 480/60p, or
576/50p signal
Other movie-based signals
System format
Select [AUTO], [RGB], or [YC
C
B
Select [AUTO], [RGB], or [YP
P
B
Select [RGB] or [YC
C
].
B
R
Select [RGB] or [YP
P
].
B
R
].
R
].
R
ENGLISH - 99
Advertisement
Table of Contents
