Table of Contents
Advertisement
Setting [MAX LIGHT OUTPUT LEVEL]
Adjust the maximum level to correct screen brightness according to the changes in brightness of the light source.
1)
Press as to select [OPERATION SETTING].
2)
Press the <ENTER> button.
f The [OPERATION SETTING] screen is displayed.
3)
Press as to select [MAX LIGHT OUTPUT LEVEL].
4)
Press qw to adjust.
Operation
Press w.
Press q.
5)
Press as to select [APPLY].
6)
Press the <ENTER> button.
7)
When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Note
f When [OPERATING MODE] is set to [NORMAL], [LONG LIFE1], [LONG LIFE2], or [LONG LIFE3], the item of [MAX LIGHT OUTPUT
LEVEL] cannot be adjusted.
f The brightness is corrected using this setting when the [PROJECTOR SETUP] menu → [BRIGHTNESS CONTROL] → [BRIGHTNESS
CONTROL SETUP] → [CONSTANT MODE] is set to [AUTO] or [PC].
f The [MAX LIGHT OUTPUT LEVEL] setting does not return to factory default setting even if the [PROJECTOR SETUP] menu →
[INITIALIZE] → [ALL USER DATA] is executed.
Setting [LIGHT OUTPUT]
Adjust the brightness of light source.
The [LIGHT OUTPUT] setting is synchronized with the [PROJECTOR SETUP] menu → [LIGHT OUTPUT]. The
most recent setting is reflected in both items.
1)
Press as to select [OPERATION SETTING].
2)
Press the <ENTER> button.
f The [OPERATION SETTING] screen is displayed.
3)
Press as to select [LIGHT OUTPUT].
4)
Press qw to adjust.
Operation
Press w.
Press q.
*1 The upper limit of the adjustment range is the value of [MAX LIGHT OUTPUT LEVEL].
5)
Press as to select [APPLY].
6)
Press the <ENTER> button.
7)
When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Note
f [LIGHT OUTPUT] can be adjusted individually for each setting item of [OPERATING MODE].
f The uniformity of the brightness between multiple displays can be maintained by adjusting [LIGHT OUTPUT] for each projector when
structuring a multi-display screen by combining the projected images from multiple projectors.
158 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Increases the maximum level of brightness correction.
Decreases the maximum level of brightness correction.
Brightness
The screen becomes brighter.
The screen becomes darker.
Adjustment
Adjustment
Runtime
The runtime becomes shorter.
The runtime becomes longer.
Range of adjustment
8.0 % - 100.0 %
Range of adjustment
8.0 % - 100.0 %
*1
Advertisement
Table of Contents
