Table of Contents
Advertisement
3)
Press as to select [DUAL LINK SETTING] or [QUAD LINK SETTING], and press the <ENTER> button.
f The [DUAL LINK SETTING] screen or the [QUAD LINK SETTING] screen is displayed.
f When [DUAL LINK SETTING] is selected, press as to select [SDI1-2] or [SDI3-4], and press the
<ENTER> button.
4)
Press as to select [4K DIVISION].
5)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[SQUARE]
[INTERLEAVE]
Setting [3G-SDI MAPPING] in [SDI IN]
1)
Press as to select [SDI IN].
2)
Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3)
Press as to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]
screen is displayed.
f When [QUAD LINK SETTING] is selected, proceed to Step 5).
4)
Press as to select [SDI1], [SDI2], [SDI3], [SDI4], [SDI1-2], or [SDI3-4], and press the <ENTER> button.
f The [SINGLE LINK SETTING] screen or [DUAL LINK SETTING] screen for the selected item is displayed.
5)
Press as to select [3G-SDI MAPPING].
6)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[LEVEL A]
[LEVEL B]
Note
f This function does not operate when the SD-SDI signal or the HD-SDI signal is input.
f [3G-SDI MAPPING] cannot be set when [SDI LINK] is set to [AUTO].
Setting [SYSTEM SELECTOR] in [SDI IN]
1)
Press as to select [SDI IN].
2)
Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3)
Press as to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]
screen is displayed.
f When [QUAD LINK SETTING] is selected, proceed to Step 5).
4)
Press as to select [SDI1], [SDI2], [SDI3], [SDI4], [SDI1-2], or [SDI3-4], and press the <ENTER> button.
f The [SINGLE LINK SETTING] screen or [DUAL LINK SETTING] screen for the selected item is displayed.
5)
Press as to select [SYSTEM SELECTOR].
6)
Press qw to switch the item.
f The items will switch each time you press the button.
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically select [SQUARE] or [INTERLEAVE].
Fixes the transmission method to Square Division.
Fixes the transmission method to 2-Sample Interleave Division.
Automatically select [LEVEL A] or [LEVEL B].
Fixes the mapping method to 3G-SDI Level-A.
Fixes the mapping method to 3G-SDI Level-B.
ENGLISH - 119
Advertisement
Table of Contents
