Verifying Phone Startup - Cisco SPA50 Series User Manual

Hide thumbs Also See for SPA50 Series:

Table of Contents

Installing Your Phone

Verifying Phone Startup

Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide

•

Wired headsets—Connect the 2.5mm connector from the headset into the

headset port on the right side of the IP phone:

After receiving power and network connectivity, the phone executes a boot-up

sequence. During this sequence, phones with screens display the Cisco logo and

then Initializing Network. All of the lights on the phone flash.

After your phone is successfully connected to the network and receives a basic

configuration, your phone line keys should glow green (on models with phone line

keys).

On models with screens, the phone displays the standard menu for the phone. The

date, name and number of the phone display on the top line of the IP phone screen.

At the bottom of the IP phone screen, softkeys are displayed over their associated

soft buttons.

Table of Contents