Table of Contents
Advertisement
How to Use the Disc Locks
The disc tray has four disc locks that prevent the disc from falling when
the drive is set up in vertical position.
Note:
When the drive is used in horizontal position, you do not need to lock the
disc.
Locking and unlocking
All of the four locks are set in the unlocked position (facing outward)
when the drive is shipped from the factory. To set the lock in the locked
position, turn it with your fingers until you hear a click so that it faces
inward.
locked
to unlock
22
Operating the Drive
Disc locks
unlocked
to lock
When the drive's right side is down
To facilitate disc handling, set the disc locks B, C and D into the locked
position, and leave the disc lock A in the unlocked position.
A
D
Top side
Right side
B
C
When the drive's left side is down
To facilitate disc handling, set the disc locks A, C and D into the locked
position, and leave the disc lock B in the unlocked position.
C
B
Top side
Left side
D
A
Operating the Drive
23
Advertisement
Table of Contents
