Table of Contents
Advertisement
Software Requirement
To access data on CD-ROM discs, the appropriate device driver and
MSCDEX or its equivalent must be installed in your computer.
The application software you need for using the data on a CD-ROM disc
depends on the type and format of the target data. See the manual supplied
with your CD-ROM disc for instructions.
Example of System Setup
To use the CD-ROM drive unit, the following components are required:
Computer (IBM PC, PC/XT, PC/AT, HP Vectra, or equivalent)
Floppy disk drive
IDE interface cable (40 to 40 pin flat cable)
Software (Device driver, Utilities)
6
Introduction
Location and Function of Parts and Controls
Front Panel
Disc drawer
Accepts a CD-ROM disc on its tray.
Headphones jack
Accepts a stereo headphones set. Analog audio signals are output.
Volume control
Controls the volume level of sound output from the headphones jack
Busy indicator
This indicator lights up in one of the following colors to show the unit's
status.
Green: Power on
Amber: TOC (table of contents) read, seek, data read, audio playback.
In addition to the above, the indicator flashes alternately in amber and
green while the drawer is in motion.
Emergency eject hole
Used to open the disc drawer manually when neither the eject button
nor a software command works. Insert a pointed object, such as a paper
clip, into this hole and push.
Eject button
Opens and closes the disc drawer.
Location and Funktion of Parts and Controls
.
7
Advertisement
Table of Contents
