Table of Contents
Advertisement
Rear Panel
F. GND (Frame ground) tab
Connect to one of the host computer's ground cables when the drive's
frame is not in direct contact with the computer.
Unused
ANALOG AUDIO connector
Outputs analog audio signals.
Configuration Jumpers
See page 11 for details.
INTERFACE CONNECTOR (IDE bus)
Connect to IDE host adapter using a connecting cable.
DC INPUT (power-in) connector
Connect to the power supply of the host computer.
8
Location and Funktion of Parts and Controls
Pin 1
Precautions
Installation
Avoid placing the drive in a location subject to:
– high humidity
– high temperature
– excessive dust
– mechanical vibration
– direct sunlight
The drive can be used in either a horizontal or vertical position.
Do not force the power cable. It is keyed to protect the drive.
Operation
Do not move the drive when it is in use. Doing so may cause data error
and damage the optical pick-up.
Avoid exposing the drive to sudden changes in temperature as
condensation may form on the lens inside the drive. Should the
surrounding temperature suddenly rise while the drive is turned on, stop
using the drive and leave the power on at least one hour before
operating it or turning it off. Operating the drive immediately after a
sudden increase in temperature may result in a malfunction.
Transportation
Close the disc drawer before moving the drive.
Keep the original packing materials. When you need to ship the drive to
another location, repacking it in its original container will help you
transport it safely.
Precautions
9
Advertisement
Table of Contents
