EXFO EX10 User Manual page 11

Introducing the EXFO EX10
EXFO EX10 Device
USB-C Charging Port
The battery of the EX10 device is not fully charged at the factory. Charge
the battery before using the EX10 device for the first time or when it has
been unused for extended periods.
The battery needs to be fully charged before using the unit for the first time.
To charge the EX10 device:
1. Connect the supplied USB cable to the USB power adapter.
2. Connect the other end of the USB cable to the EX10 USB-C charging
port.
3. Connect the USB power adapter to a power outlet.
The battery is fully charged when the On/Off switch LED stops flashing
while connected to the USB power adapter. The charge cycle starts and
stops automatically.
Note: Refer to Recharging the Battery on page 30 for more information.
3
EXFO EX10