EXFO Optical Explorer OX1 Important Information Manual
  1. Manuals
  2. Brands
  3. EXFO Manuals
  4. Test Equipment
  5. Optical Explorer OX1
  6. Important information manual
EXFO Optical Explorer OX1 Important Information Manual

EXFO Optical Explorer OX1 Important Information Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
N
OTICE
This information only applies to the
OX1 Optical Explorer units.
Important Information
Note: Before getting started with the EXFO OX1 Optical Explorer, first read the
important safety information provided in this notice. For additional
information, refer to the OX1 Optical Explorer user guide available from the
TestFlow/Exchange mobile application.
Overview
The OX1 Optical Explorer is a handheld, ultra-simple, and ultra-fast tool
offering multiple test functions to verify any short- to medium-length (up to
40 km) optical links and their components. It is particularly well suited for
installation and repair jobs.
It can work in association with a smart device equipped with the EXFO
TestFlow/Exchange mobile application allowing you to document the test
results, archive them, and generate reports.
1/30
P/N: 1083015
Version: 2.0.0.1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Optical Explorer OX1 and is the answer not in the manual?

Questions and answers

Related Manuals for EXFO Optical Explorer OX1

Summary of Contents for EXFO Optical Explorer OX1

  • Page 1 OX1 Optical Explorer units. Important Information Note: Before getting started with the EXFO OX1 Optical Explorer, first read the important safety information provided in this notice. For additional information, refer to the OX1 Optical Explorer user guide available from the TestFlow/Exchange mobile application.
  • Page 2 Holes for the hand strap Optical port (Pro unit with Click-Out optical connector shown) Laser radiation emitted at this port when laser is active. Touchscreen Power (on/off) button (also serves as battery status LED) 2/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.
  • Page 3 Top panel Optical port (Pro unit with Click-Out optical connector shown) USB 2.0 Type-C connector for battery charging with USB power adapter (refer to user guide for more information) Bottom panel 3/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.

  • Page 4: Regulatory Information

    USA Electromagnetic Interference Regulatory Statement Electronic test and measurement equipment is exempt from FCC part 15, subpart B compliance in the United States of America. However, EXFO Inc. makes reasonable efforts to ensure compliance to the applicable standards. The limits set by these standards are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 5 Attention : Cet appareil n'est pas destiné à être utilisé dans des environnements résidentiels et peut ne pas assurer la protection adéquate à la réception radioélectrique dans ce type d'environnements. 5/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.
  • Page 6 Class B limits specified in the applicable ICES standard. Classe B : Matériel qui ne peut pas être inclus dans la classe A. Utilisé également pour indiquer les limites d'émission correspondantes qui s'appliquent à un tel matériel. 6/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.
  • Page 7 à des fins d’examen ou d’analyse ou pour le transfert d’énergie électromagnétique. Supplier’s Declaration of Conformity (SDoC) The SDoC for your product is as follows: CAN ICES-001 (A) / NMB-001 (A) 7/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.
  • Page 8 Operation is subject to the following two conditions:  (1) This device may not cause harmful interference (2) this device must accept any interference received, including interference that may cause undesired operation. 8/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.
  • Page 9 - 2462 MHz. The output power is 11.7 dBm typical. Wi-Fi: Channels 1 through 11 - Between the frequencies 2412 MHz -  2462 MHz. The maximum output power is 18.5 dBm. 9/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.
  • Page 10 RF output power may be limited to 10 mW EIRP in the frequency range of 2454 - 2483.5 MHz. For detailed information, the end-user should contact the national spectrum authority in France. 10/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.
  • Page 11 Simplified EU and UK Declaration of Conformity For units equipped with wireless capabilities: Hereby, EXFO declares that the radio equipment type “OX1” is in compliance with European Directive 2014/53/EU and the UK legislation S.I. 2017/1206 Radio Equipment Regulations 2017.
  • Page 12 - 2472 MHz. The output power is 11.7 dBm typical. Wi-Fi: Channels 1 through 13 - Between the frequencies 2412 MHz -  2472 MHz. The maximum output power is 18.5 dBm. 12/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.

  • Page 13: General Safety Information

    ARNING Use only accessories designed for your unit and approved by EXFO. For a complete list of accessories available for your unit, refer to its technical specifications or contact EXFO.
  • Page 14 MPORTANT Other safety instructions relevant for your product are located throughout this documentation, depending on the action to perform. Make sure to read them carefully when they apply to your situation. 14/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.

  • Page 15: Other Safety Symbols On Your Unit

    The unit is equipped with an earth (ground) terminal. The unit is equipped with a protective conductor terminal. The unit is equipped with a frame or chassis terminal. On (Power) Off (Power) On/off (Power) Fuse 15/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.

  • Page 16: Laser Safety Information

    DO NOT EXPOSE USERS OF TELESCOPIC OPTICS CLASS 1M LASER PRODUCT RAYONNEMENT LASER INVISIBLE NE PAS OBSERVER DIRECTEMENT À L'AIDE D'INSTRUMENTS D'OPTIQUE NE PAS EXPOSER LES UTILISATEURS DE DISPOSITIF OPTIQUE TÉLESCOPIQUE APPAREIL À LASER DE CLASSE 1M 16/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.

  • Page 17: Electrical Safety Information

    If you need to ensure that the unit is completely turned off, disconnect the power cable and remove the battery. For more information on how to remove the battery, see the section about replacing the battery in this user documentation. 17/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.
  • Page 18 ES1 circuits only. Use only the listed and certified USB power adapter provided by  EXFO with your unit. It provides reinforced insulation between primary and secondary, and is suitably rated for the country where the unit is sold.
  • Page 19 USB power adapter: 10 % to 90 % non-condensing  Maximum operation altitude 2000 m (6562 ft) (unit connected to external power  source) 5000 m (16405 ft) (unit operated from battery)  19/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.
  • Page 20 Measured in 0 °C to 31 °C (32 °F to 87.8 °F) range, decreasing linearly to 50 % at 40 °C (104 °F). Equipment must be normally protected against exposure to direct sunlight, precipitation and full wind pressure. Not exceeding ± 10 % of the nominal voltage. 20/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.

  • Page 21: General Maintenance

    The use of controls, adjustments and procedures, namely for operation and maintenance, other than those specified herein may result in hazardous radiation exposure or impair the protection provided by this unit. 21/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.

  • Page 22: Cleaning The Touchscreen

    Clean the touchscreen with a soft, non-abrasive cloth, such as one used for cleaning reading glasses, dampened with water. AUTION Using anything else than water can damage the special coating of the touchscreen. 22/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.

  • Page 23: Replacing The Battery

    Your unit uses a smart lithium-ion (Li-ion) or lithium-polymer (Li-Po) battery with built-in protection that has been especially designed for EXFO. For this reason, you can only replace it with batteries of the same type and model. You can purchase new batteries from EXFO.
  • Page 24 3. On the back of the unit, using a 2.5 mm hex socket screwdriver, turn the screws (4) counterclockwise until they are loose, and remove them. 4. Hold the back panel by its sides and pull it up to remove it. 24/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.
  • Page 25 Battery’s wires Battery’s connector 6. Pull the battery up to remove it. 7. Place the new battery so that its wires are located on the left side, toward the front. Wires 25/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.
  • Page 26 This will secure the back panel into place. MPORTANT To allow the unit to take into account the new battery, reset the battery information as explained hereafter. 26/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.
  • Page 27 It could take a few charge/discharge cycles before the unit’s LED  indicator and the on-screen battery status icon reflect the actual power level of the new battery. 27/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.

  • Page 28: Recycling And Disposal

    Contacting the Technical Support Group To obtain after-sales service or technical support for this product, contact EXFO at one of the following numbers. The Technical Support Group is available to take your calls from Monday to Friday, 8:00 a.m. to 7:00 p.m.
  • Page 29 Contacting the Technical Support Group 29/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.
  • Page 30 Contacting the Technical Support Group 30/30 Copyright © 2019–2022 EXFO Inc. All rights reserved.

Table of Contents