6 - Maintenance
Inner boom folding/unfolding adjustment
To make sure the boom is 100% in line for correct folding / unfolding.
The rod marked (G) can be adjusted in combination with the end of
piston (F).
F
G
Vertical adjustment of first outer section
Adjust the outer section to be in level with the inner section, by
adjusting bolt (A).
B
To adjust it, undo both lock nuts (A), then turn both bolt (B) equally until
section is straight and in level. When adjusted re-tighten both lock nuts
B
(A).
A
A
Vertical adjustment of breakaway
Adjust the breakaway to be in level with the boom or a little higher, by
adjusting screw, do never let it be lower than the main boom, as it
increased risk of interfering with the ground during the spray job.
117