Checking For Blockages - Shark WANDVAC WS632SM Series Owner's Manual

MAINTAINING YOUR VACUUM

CHECKING FOR BLOCKAGES

Checking for Blockages in the Handheld Vacuum:
1. Turn off vacuum.
2. Remove the handheld vacuum from the wand.
3. Check all intake openings to the dust cup and remove any
debris or blockages.
Checking for Blockages in the Wand:
1. Turn off vacuum.
2. Detach the handheld vacuum and floor nozzle from the
wand.
3. Check both ends of the wand for blockages and debris.
4. Clear away any debris or blockages.
Checking for Blockages in the Floor Nozzle:
1. Turn off vacuum.
2. Detach the wand.
3. Use the edge of a coin to open the four locks on the
bottom of the floor nozzle.
4. Remove the cover and tilt back the neck of the
floor nozzle.
5. Check the opening and remove any debris or blockages.
6. Replace cover by firmly pressing down on all sides and
turning the locks clockwise to close.
s h a r kc l e a n . s g 11