Shark WANDVAC SYSTEM WS640 Quick Start Manual

CORDLESS 3-IN-1
UPRIGHT
The brushroll is activated when the hand
vacuum is connected and powered on,
and the handle is tilted back.
ABOVE-FLOOR
HAND VACUUM
To detach the hand vacuum, slide the release
tabs on both sides of the handle and lift it
off the wand. Attach an accessory by sliding
it into the nozzle. To remove the accessory,
slide the release tabs on the handle. To
reattach the hand vacuum, slide the nozzle
over the wand on until it clicks into place.
ABOVE-FLOOR
WAND
To detach the floor nozzle, step on the nozzle
while pressing the release button at the
bottom of the wand. Lift the wand to remove
it. Reattach by sliding the wand over the
nozzle neck until it clicks into place.
© 2022 SharkNinja Operating LLC. SHARK and WANDVAC are registered trademarks
of SharkNinja Operating LLC. POWERFINS is a trademark of SharkNinja Operating LLC.
EMPTYING THE DUST CUP
1
With the power off, slide the release button
forward, and the dust cup will swing open. Tap the
dust screen lightly to knock off dust and debris.
2
Wipe dust screen lightly with a dry cloth
to remove dust and dirt.
WS640Series_QSG_MP_220223
Please make sure to read the enclosed Shark® Owner's Guide prior to using your vacuum.
WANDVAC
SYSTEM
CORDLESS 3-in-1
QUICK
START
GUIDE
For questions, visit us online
at sharkclean.com/support
Register your vacuum at
registeryourshark.com
visit qr.sharkclean.com
/ws640seriesmanual or
SCAN HERE
USING YOUR SMARTPHONE CAMERA
FOR FULL INSTRUCTIONS
& REPLACEMENT PARTS
WS640
®
PET