Cleaning Modes - Shark WANDVAC WS632SM Series Owner's Manual

UPRIGHT WITH WAND
To clean floors, place foot on floor nozzle and tilt
handheld vacuum back.
NOTE: To remove accessories from the hand vac, press
the two release tabs on the side of the unit.
ABOVE-FLOOR WITH ACCESSORY
Attach desired accessory to handheld vacuum.
Press buttons on both sides of the handle to
remove accessory.
NOTE: All accessories are compatible with both the wand and the handheld vacuum.
8 s h a r kc l e a n . my

CLEANING MODES

To detach the handheld vacuum from the wand,
press the buttons on both sides of the handle, and
lift the handheld vacuum off the wand.
To reattach the handheld vacuum to the wand,
align the nozzle over the top of the wand and slide
it on until it clicks into place.
For more reach to clean above-floor areas, detach
the floor nozzle from the wand. Step on the floor
nozzle, and press the nozzle release button at the
bottom of the wand. Lift the wand to remove it.
To reattach the wand, align it over the nozzle neck,
then slide it on until it clicks into place.
ABOVE-FLOOR HANDHELD
ABOVE-FLOOR WITH WAND