Shark WANDVAC WS632SM Series Owner's Manual page 4

1. Insert Wand into Nozzle.
2. Insert Handheld Vacuum into wand.
For proper operation, ensure all components are
completely connected and clicked into place.
2.
1.
Floor
Nozzle
NOTE: Your vacuum's model and serial numbers
can be found on the QR code label on the bottom
of the back of the handheld vacuum.
4 s h a r kc l e a n . my
ASSEMBLY
Handheld
Vacuum
Wand
3. Make sure the Dock Plate is facing upright. Slide
the Charging Post into the slot on the back of
the dock until it clicks into place.
4. Place the dock on the floor near a power socket.
Plug the Wall Charger into the socket, then
connect the cord to the port on the back of the
charging post.
5. Store Duster Crevice on the mount on the dock
plate.
NOTE: Once the charging post is installed, it can't be
removed.
Charging
Post
3.
(Click)
4.
Accessory
Storage
5.
Wall
Charger
Dock
Plate
Assembled
Dock