Checking For Blockages - Shark EVOPOWER CS850SM Series Owner's Manual

MAINTAINING YOUR VACUUM
NOZZLE MAINTENANCE POWERFINS™ FLOOR NOZZLE
POWERFINS FLOOR NOZZLE
1. Turn off the vacuum.
2. Press the nozzle release button to detach
the nozzle from the wand.
3. Press the button on the top of the nozzle
and pull the brushroll out of the nozzle.
4. Clear any blockages and remove any
debris from the brushroll and floor nozzle.
5. Tap off loose debris, then wipe the
brushroll clean with a dry towel. Hand-
wash the brushroll when needed, using
only water, and let it air-dry completely
for at least 24 hours.
6. When the brushroll is dry, reinstall it in the
nozzle by inserting one end first, then the
other, until it clicks into place.
sharkninja.sg
BRUSHROLL MAINTENANCE
MAINTAINING YOUR VACUUM

CHECKING FOR BLOCKAGES

Checking for Blockages in the Handheld Vacuum:
1. Turn off the vacuum.
2. Remove the handheld vacuum from the wand.
3. Check all intake openings to the dust cup and
remove any debris or blockages.
Checking for Blockages in the Wand:
1. Turn off the vacuum.
2. Detach the handheld vacuum and floor nozzle
from the wand.
3. Check both ends of the wand for blockages and
debris.
4. Clear away any debris or blockages.
Checking for Blockages in the PowerFins™ Floor
Nozzle:
1. Turn off the vacuum.
2. Detach the wand.
3. Remove brushroll.
4. Check the opening and remove any debris or
blockages.
5. Slide brushroll back into place.
s h a r k n i n j a . m y