SAFETY PRECAUTIONS
CAUTION: Improper usage can cause serious injury to personnel and/
or
●
Check each component after opening the package to make sure
everything is in good condition. If there are any suspected dam
age, do not use the item and report the issue to your vendor.
●
Turn OFF the main power switch and unplug the device from
power source when moving the device.
●
Do not strike or subject the main unit (and all its components) to
physical shock. Use carefully to avoid damage to any part.
Never drop or sharply jolt the unit.
Contains delicate parts that may break if the unit is dropped.
●
Make sure the equipment is always grounded. Always connect
power to a grounded receptacle.
●
Temperature may reach as high as 480°C when switched ON.
Do not use the device near flammable gases, paper and other
flammable materials.
Do not touch heated parts, which can cause severe burns.
Do not touch metallic parts near the tip.
●
Disconnect the plug from the power source if the unit will not be
used for a long period.
Turn off power during breaks, if possible.
●
Soldering process produces smoke, use on well ventilated places.
●
Do not alter the unit, specifically the internal circuitry, in any man
ner. HIGH VOLTAGE present inside the unit. DO NOT attempt to
service equipment.
4
damage to equipment and work area. For your own safety,
please observe the following precautions.