Raider PRO RDP-SBBC20 User Manual page 18

18 www.raider.bg
On sloping terrain, always cut across the slope, never down and up.
Take special care when reversing the slope!
When turning on the cordless brush cutter, make sure your feet are at a safe distance from the
rotating elements.
Do not use the machine when barefoot or with sandals. Always work with tight, closed shoes and
long pants.
Switch off the circuit breaker whenever:
- move away from the machine;
- before removing the elements that blocked the machine;
- when inspecting, cleaning or operating the machine;
- when the machine starts to vibrate abnormally strongly.
- immediately inspect the machine for any damage after contact with a foreign body and ensure that
they are removed before use;
The operator or user is responsible for accidents, injuries to others or the environment and material
damage.The cordless brush cutter is designed so that all moving parts and the housing ensure safe
conditions of use. The manufacturer is not responsible for damages caused as a result of attempts to
alter the construction of the battery brush cutter.
For safety reasons, you should only use genuine spare parts or parts recommended by the
manufacturer.
Failure to follow these instructions may result in electric shock, fire and / or serious injury.
2. FUNCTIONAL DESCRIPTION AND PURPOSE.
A cordless trimmer designed only for cutting grass and light weeds. It should not be used for other
purposes, such as edging or cutting of hedges, as this may cause injury or damage to the machine.
Use only accessories and accessories recommended by the manufacturer. Using other accessories
and attachments may increase the risk of injury or damage to the machine.
3. ASSEMBLING THE ELEMENTS OF THE BATTERY BRUSH CUTTER AND PUTTING IT
INTO SERVICE.
Some trimmer parts are disassembled to reduce the volume of the package during transport.
Mounting the protective cover
Attach the safety cover (7) to the brush cutter base using the set screws and the cross-head
ATTENTION
• Before inserting batteries into the tool, always check that the switch is activated
triggers correctly and returns to the OFF position when released.
Using a tool with a switch that does not operate properly can result in loss of control and serious
personal injury.
A lock lever is provided to prevent the switch trigger from being accidentally pulled.
To start the tool, grasp the back handle (the locking lever is released from the grip) and then pull the
switch trigger.
screwdriver as shown in Figure A
Attention !!! Never use the brush cutter without first applying the protective cap.
Starting the brush cutter
If this is the first time the brush cutter is being used, make sure that the cord
touches or passes the safety cover.
The cord should be cut automatically if it is loosened to the maximum (outside
the protective cover). To achieve the required length of cord or knife, hold the
button as shown in Figure B and C