Lionel Berkshire LionChief Owner's Manual page 26

Using the LionChief Universal Remote
The LionChief Universal Remote continued
WHISTLE / HORN / FRONT COUPLER BUTTON
Press the Whistle / Horn button to activate the horn / whistle. To activate the front coil coupler on
the locomotive press and hold the Announcement button down and, using another finger, press and
release the Whistle/Horn button to activate the front coupler. Then release the Announcement/Shift
button.
BELL BUTTON / REAR COUPLER BUTTON
To turn the bell on, press the bell button one time. To turn the bell off press the button again. To
activate the rear coil coupler on the locomotive press and hold the Announcement button and,
using another finger, press and release the Bell button to activate the rear coupler. Then release the
Announcement/Shift button.
ENGINE SELECTION
1, 2, 3
Each Engine Selection button represents a channel for controlling one LionChief, LionChief Plus,
or Legacy Bluetooth locomotive. Each of these buttons may be "paired" with a different locomotive.
Once paired, you can control multiple locomotives from one remote by pressing an Engine Selection
button, then using the throttle, horn, bell, etc..
Your remote will remember all locomotive pairings when you turn everything back on
Note!
for your next operating session.
THROTTLE
Turn the throttle clockwise slowly to increase speed in the forward direction. Returning the throttle to
the top dead center position will bring the locomotive to a stop. Moving the throttle counterclockwise
will increase the speed of the locomotive in reverse. The Throttle also functions as the volume control
for LionChief Plus locomotives. Refer to "Adjusting the locomotive volume" section in this manual
for more detailed information.
26