Operating Your Train Set; Running Your Train Set - Lionel Berkshire LionChief Owner's Manual

Operating your train set

Running your train set

With track power unplugged, place your train set on the track.
1
Refer to the following section for information on coupling the cars.
Couple the locomotive to the tender
2
Fit the tab on the locomotive drawbar into the slot on
the tender's drawbar as illustrated in Figure 5. Note that
the drawbar connection connects the locomotive and
tender electronically. Make the connection securely to
ensure good electrical contact.
Plug in your wall-pack power supply, connect it to
3
the track, and switch on the remote.
Move 'em out!
4
Use your remote to run your train. You can adjust the speed
in forward or reverse, blow the whistle, sound the bell, or trigger an
announcement. Refer to page 12 for complete details.
Unplug the wall-pack power supply when you are done running your
5
trains.
Switch off your remote control to conserve the batteries.
Figure 5. Drawbar connection
11