Olympus DP21-SAL Instructions Manual page 63

Network setting
The DP21-SAL can access PCs on a network when the control box D21-CB is connected to a LAN.
}The network setting should be performed by the network administrator.
}The keyboard and mouse should be connected for the network setting.
The network setting makes the following operations possible.
· Direct saving of recorded images in a networked PC.
· Playback of recorded images saved in a networked PC on the DP21-SAL. (Only the images recorded using the
DP21/DP26 can be played back on it. Even when an image is recoded using the DP21/DP26, it may sometimes be
unable to be played if it has been edited on the PC.)
1
Downloaded from ManualsNet.com
Network connection method
1. Connect a LAN cable to the LAN cable connector @ of the control box D21-CB.
2. Click on the [NETWORK] icon in the [Maintenance] window. The following [Net-
3. Enter the setting items (Member, IP address, DNS server name) by following the
}Enter the setting items according to the connection environment being used.
}The settings are not applied to the system unless the LAN cable is connected.
}It is not permitted to change the computer name (system name) of the DP21-SAL.
}When setting the network, it restarts automatically in order to reflect the setting
Fig. 30
}If the power is turned OFF by operating the control box D21-CB (including re-
search engine
work Connection Setting] window will appear.
instructions in the [Network Connection Setting] window.
For details, consult your network administrator.
items to the system. It takes several minutes as it restarts twice. Do not turn the
power OFF or draw out AC adapter until it completes restarting.
starting when setting the network, etc.), you may not access to the network for
first several minutes after DP21-SAL restarts.
This is due to that the network-related system settings are being continued after
DP21-SAL starts. In this case, after DP21-SAL starts, please wait for a few minutes
prior to using.
DP21-SAL
60