Olympus DP21-SAL Instructions Manual page 22

1
Operation using the hand switch D21-HS: Select the language with the cursor buttons
button ² to enter the selection.
Operation using the mouse: Click on the scroll button to select the language and click on [FINISH (SET/OK)] to enter the
selection.
19
Downloaded from ManualsNet.com
2
Fig. 11
(Example) Language setting
search engine
2
Initial Setting
To use the system correctly, it is required to set the language and scale
magnification at the beginning.
Set them by following the window displayed when the system is turned
ON for the first time.
}The setting window is not displayed the next time the system is turned
ON. Even when they are not set at the first time, they can be set anytime
using a menu.
1. The setting window appears when the system is turned ON.
}Before initial setting, disconnect the USB memories (including the re-
movable media devices such as HDD) from the hand switch D21-HS
and/or control box D21-CB. They can be reconnected after completion of
restarting (auto restart) after the setting.
If the control box (U-CBS, etc.) is connected to the control box D21-CB,
refer to "FUNCTIONS INTERLOCKED WITH MICROSCOPE OPERATIONS"
on page 63 for initial setting.
2. Set the language by following the wizard.
3. Also set the scale magnification (magnifications of the camera adapter
and objective in use) in the same way. The control box D21-CB restarts
after completion of the setting.
}See page 57 for the language setting and page 38 for the scale magni-
fication setting.
}The clock setting and monitor resolution setting windows are not dis-
played automatically. For their setting methods, see "Date/Time Setting
(p. 56)" and "Monitor resolution setting (p. 59)."
}Image recording is possible even when the date/time are not set, but the
date/time information in the file name of the recorded image becomes
incorrect. To prevent this, it is recommended to set the date and time
before recording an image.
}The monitor resolution is usually set automatically but may not be set
with certain monitors. To prepare for such a case, it is recommended to
set the monitor resolution in advance on this opportunity.
Default: English
@ and press the SET/OK