Olympus DP21-SAL Instructions Manual page 36

5
Save Folder Setting
When more than one DP21/DP26 unit records and saves images into the
same folder in a network PC, etc. at the same timing, an error about the
impossibility of saving the recorded images may occur. Wait a while and
retry recording the images or save the image files in different folders.
AUTO
When the save destination is set to "AUTO," the images are saved in a USB removable medium such as the USB memory
connected to the hand switch D21-HS or control box D21-CB. If multiple media are connected, the images are saved in
the first connected one. If a single medium is divided into multiple partitions, the images are saved in the first drive.
The recorded images are saved in the folder that is created automatically in the medium. The folder names as well as the
file names of the recorded images are created automatically. For details on the folder and file names, see "Folder and File
Names (p. 36)."
MANUAL
The user can specify the image save destination, which is shown in @. The save destination can be set using only the
hand switch D21-HS, but the use of the keyboard is required if the save destination is protected by a password, etc.
1. Place the cursor on "MANUAL" and press the SET/OK button.
2. Similarly, place the cursor on ² and press the SET/OK button. The [Folder Select] window as shown below is displayed.
3. Select the save destination location.
}If the save destination folder name is turned into garbled characters due to the use of special characters, etc. malfunction
may result.
[Folder Select] window
33
Downloaded from ManualsNet.com search engine
Default: AUTO
Setting the save folder ²
Save folder @