Olympus DP21-SAL Instructions Manual page 52

Count
This function draws markings and serial numbers on the specified positions. Up to 50 markings can be displayed
simultaneously.
}Even after this measurement is exited or another measurement function is performed, the markings are displayed in order
of serial numbers unless they are erased.
Measurement target
When the SET/OK button is pressed (or
the mouse is left-clicked), the markings
and serial numbers are displayed.
Cross Line
This function measures the distance between the specified point and the origin point (image center).
Measurement target
The line connecting the specified point and
origin point and the cross lines are drawn, and
the distance between the two points is
displayed.
49
Downloaded from ManualsNet.com
1. When
2. Press the SHIFT button (or left-click the mouse if this is in use) on the points to
3. To end measurement, press the SET/OK button or MENU button (if you are
1. When
2. Press the SHIFT button (or left-click the mouse if this is in use) on the points
3. To end measurement, press the SET/OK button or MENU button (if you are
search engine
is selected, pointer "
using the cursor buttons
be counted.
using the mouse, right-click it or left-click it on [END (MENU)] at the top right of
the screen).
is selected, pointer "
using the cursor buttons
desired for the measurement. If you want to perform another Cross Line mea-
surement, press the SHIFT button on the desired points.
using the mouse, right-click it or left-click it on [END (MENU)] at the top right of
the screen).
" is displayed. The pointer can be moved
or the mouse.
" is displayed. The pointer can be moved
or the mouse.