Olympus DP21-SAL Instructions Manual page 28

2
1
25
Downloaded from ManualsNet.com
Fig. 17
search engine
9
Recording Movies
1. On the microscope, frame the image to be recorded and focus on it.
2. While holding the SHIFT button @, press the EXPOSE button ² to start
movie recording.
3. To stop movie recording, press the EXPOSE button ². The movie is
saved in the USB memory.
}The INFO display shows the following information during movie record-
ing (the MODE display shows "REC").
}The image size and format of the recorded movie are as follows and
cannot be modified.
Image size : 400 x 300 (DP21)
408 x 320 (DP26)
Format: Non-compressed AVI
}The settings cannot be changed in the middle of movie recording. They
should be changed after completing the recording.
}A movie can be recorded for up to 5 minutes (this period is variable
depending on the frame rate and storage medium capacity). Movie re-
cording may stop anytime automatically when the maximum file size is
reached or the storage medium runs out of capacity.
}" " on the INFO display indicates the number of recordable still-image
images, and the number of recordable movies is not displayed.
}When the system is turned OFF in the middle of movie recording, the
movie ends at that point.
}The folder and file names of the recorded movies are created automati-
cally. See page 36 for details.
Tip
The movie save destination can be changed (p. 33).
However, the movie frame rate may drop depending on the data write
speed of the recording medium (at the time of playback, such a movie
look like a fast-forward movie).