Olympus DP21-SAL Instructions Manual page 51

Distance of Parallel Lines
This function draws a couple of parallel lines and measures the distance between them.
Measurement target
The line connecting 1-2 is drawn.
A parallel line passing 3 is drawn and the
distance between two lines is displayed.
The drawn parallel line has the same
length as line 1-2.
XY Distance
This function measures the X-distance, Y-distance and L-distance between the 2 specified points.
Measurement target
The line connecting @ and 2 is drawn and
the X-distance, Y-distance and L-distance
between the 2 points are displayed.
Downloaded from ManualsNet.com
1. When
2. Press the SHIFT button (or left-click the mouse if this is in use) on the points
3. To end measurement, press the SET/OK button or MENU button (if you are
1. When
2. Press the SHIFT button (or left-click the mouse if this is in use) on the points
3. To end measurement, press the SET/OK button or MENU button (if you are
search engine
is selected, pointer "
using the cursor buttons
desired for the measurement. If you want to measure the distance of another
parallel line, press the SHIFT button on the desired point.
using the mouse, right-click it or left-click it on [END (MENU)] at the top right of
the screen).
is selected, pointer "
using the cursor buttons
desired for the measurement. If you want to perform another XY distances mea-
surement, press the SHIFT button on the desired points.
using the mouse, right-click it or left-click it on [END (MENU)] at the top right of
the screen).
" is displayed. The pointer can be moved
or the mouse.
" is displayed. The pointer can be moved
or the mouse.
DP21-SAL
48