Olympus DP21-SAL Instructions Manual page 18

1
15
Downloaded from ManualsNet.com
1
Fig. 6
2
1
Fig. 7
CAUTION
search engine
5
Connecting the Hand Switch D21-HS
Insert the USB cable connector of the hand switch D21-HS into one of
the USB ports @ of the control box D21-CB.
}The control box D21-CB has a total of four USB ports. The hand switch
D21-HS function is identical regardless of the connected USB port so the
user can select any USB port as desired.
6
Inserting the USB memory
Insert the USB memory @ all the way into the USB port ² of the hand
switch D21-HS.
7
Applicability of USB Device
USB memory
}Do not connect a USB device other than the USB memory provided with
the DP21-SAL into the USB port of the hand switch D21-HS. Otherwise,
malfunction may result. If you use a commercially available USB memory,
connect it to a USB port of the control box D21-CB. The USB memory
provided with the DP21-SAL can also be used by inserting it into a USB
port of the control box D21-CB.
}The ACCESS LED of the hand switch D21-HS lights or blinks during data
access (for saving the recorded image, etc.). Do not disconnect the USB
memory during this period.
}The USB memory can be disconnected without special disconnection
processing such as that required with a PC. The USB memory can be
disconnected anytime except when the ACCESS LED of the hand switch
D21-HS is lighting or blinking.
}A USB memory with a special function such as the security or password
function cannot be used.
(Fig. 6)
(Fig. 7)