Table of Contents
Advertisement
Quick Links
TC-1493-IP
Rev A, October 2021
http://www.commscope.com
1
About this manual
This publication provides user information for the installation of the NOVUX™ SxT. The topics covered include a basic
product description, installation and mounting guidelines and procedures for use and maintenance of hardened
connectors and adapters. Also warnings and cautions are indicated, which should be observed before starting the
product installation. Images in this manual are for reference only and are subject to change.
2
Dimensions
NOVUX™ Fiber Optic System
99 mm
(3.90 inch)
© 2021 CommScope, Inc. All Rights Reserved
Installation Instructions
SxT
64 mm
(2.52 inch)
page 1 / 11
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CommScope NOVUX SXT
Summary of Contents for CommScope NOVUX SXT
-
Page 1: About This Manual
Also warnings and cautions are indicated, which should be observed before starting the product installation. Images in this manual are for reference only and are subject to change. Dimensions 99 mm 64 mm (3.90 inch) (2.52 inch) page 1 / 11 © 2021 CommScope, Inc. All Rights Reserved... -
Page 2: Table Of Contents
Full Size connector installation............5 6.5 HMFOC connector cleaning................ 9 5.1 Connector components................5 Maintenance..................10 5.2 Adapter components..................5 Trade-marks..................11 5.3 Connecting the Full Size connector............5 Contact information................ 11 page 2 / 11 © 2021 CommScope, Inc. All Rights Reserved... -
Page 3: Warnings And Cautions
4.1.1 Flat surface mounting with screws Note: Flat surface mount hardware (screws) not included. Note: Wall mounting is not allowed in the USA due to lack of UL listing. page 3 / 11 © 2021 CommScope, Inc. All Rights Reserved... -
Page 4: Pole Mounting
Pole mounting 4.2.1 Pole mounting with screws Note: Pole mount hardware (screws) not included. 4.2.2 Pole mounting with straps Note: Pole mount hardware (straps) not included. page 4 / 11 © 2021 CommScope, Inc. All Rights Reserved... -
Page 5: Full Size Connector Installation
The dust cap threads into the adapter housing. An O-ring on the dust cap provides a tight seal when the dust cap is in place. Connecting the Full Size connector 5.3.1 Remove dustcaps Use a 216B key tool to unscrew the dust cap from the SxT optical port. page 5 / 11 © 2021 CommScope, Inc. All Rights Reserved... -
Page 6: Disconnecting The Full Size Connector
This ensures that both dust caps will stay clean when not in use. Disconnecting the Full Size connector Unscrew the optical port dust cap from the drop cable dust cap. page 6 / 11 © 2021 CommScope, Inc. All Rights Reserved... -
Page 7: Full Size Connector Cleaning
The connectors and adapters are cleaned at the factory, however inadvertent contact and/or dust can still occur during transport, storage and installation. CommScope recommends all connector interfaces be cleaned prior to every mating. To clean the connector interface, follow the procedure as described in the installation instruction “cleaning hardened connectors”. -
Page 8: Connecting The Hmfoc Connector
Thread the cable connector’s coupling nut onto the thread of the adapter port until it is finger tight. page 8 / 11 © 2021 CommScope, Inc. All Rights Reserved... -
Page 9: Disconnecting The Hmfoc Connector
The connectors and adapters are cleaned at the factory, however inadvertent contact and/or dust can still occur during transport, storage and installation. CommScope recommends all connector interfaces be cleaned prior to every mating. To clean the connector interface, follow the procedure as described in the installation instruction “cleaning hardened connectors”. -
Page 10: Maintenance
End face clean? Connect Dry clean 3X NO Damaged Inspect End face clean? Replace ONLY REPEAT CYCLE 3X Wet/Dry clean Note: CommScope® is not responsible for damage caused by cleaning. page 10 / 11 © 2021 CommScope, Inc. All Rights Reserved... -
Page 11: Trade-Marks
This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services. CommScope is committed to the highest standards of business integrity and environmental sustainability, with a number of CommScope’s facilities across the globe certified in accordance with international standards, including ISO 9001, TL 9000, and ISO 14001.
Need help?
Do you have a question about the NOVUX SXT and is the answer not in the manual?
Questions and answers